สำรวจข้อเสนอผลิตภัณฑ์ที่หลากหลายของเรา - Explore our diverse products offerings - 探索我们多样化的产品

A modern, synthetic food grade chain fluid formulated for chains in Food and Pharma Industry. In comparison to chain oils based on mineral oil it offers food compatibility that means that all components are approved by USDA and NSF

-  high pressure ability, low pour point

-  Longer service life due to high thermal stability

-  excellent visc

A modern, synthetic food grade chain fluid formulated for chains in Food and Pharma Industry. In comparison to chain oils based on mineral oil it offers food compatibility that means that all components are approved by USDA and NSF

-  high pressure ability, low pour point

-  Longer service life due to high thermal stability

-  excellent viscosity temperature behavior

-  strong tackiness caused by very long molecules

-  Food grade, i.e. the product fulfills the requirements for an H1 lubricant for use in the food industry

Certificate: NSF, HALAL

ISO VG: 22, 32, 150, 220, and 460

Food grade synthetic oil conforms to USDA H-1, authorized for use in meat and poultry processing plants where incidental contact with food may occur. Offers improved thermal and oxidative stability over mineral oil, compatibility with most seals, plastics, rubbers and a wide operating temperature range. Extended drain intervals reduces oi

Food grade synthetic oil conforms to USDA H-1, authorized for use in meat and poultry processing plants where incidental contact with food may occur. Offers improved thermal and oxidative stability over mineral oil, compatibility with most seals, plastics, rubbers and a wide operating temperature range. Extended drain intervals reduces oil disposal, thus increasing cost effectiveness.

-  high pressure ability.

-  suitable for very low temperatures

-  extended drain intervals reduces oil disposal, thus increasing cost effectiveness

-  good viscosity temperature correlation

-  Food grade, i.e. the product fulfills the requirements for an H1 lubricant for use in the food industry

Certificate: NSF, HALAL

ISO VG: 32, 46, 68 and 100

A hydraulic and gear oil for circulation systems and hydraulic machines in food and pharma industry. Conforming to DAB 10 and NSF H1 these pure and clean oils are suitable for use in food industry with incidental food contact. Also the contained corrosion prevention and wear protective additives are FDA and cleared. 

-  good anticorrosive 

A hydraulic and gear oil for circulation systems and hydraulic machines in food and pharma industry. Conforming to DAB 10 and NSF H1 these pure and clean oils are suitable for use in food industry with incidental food contact. Also the contained corrosion prevention and wear protective additives are FDA and cleared. 

-  good anticorrosive properties

-  good pressure absorption capacity

-  good penetrative properties 

-  infiltrates water

-  Food grade, i.e. the product fulfills the requirements for an H1 lubricant for use in the food industry

Certificate: NSF, HALAL

ISO VG: 22, 32 and 68 

Fully synthetic heat transfer fluid containing synthetic additives blended in a stable synthetic oil base conforming to USDA regulations. 

-  compatible with mineral oil

-  high pressure ability

-  longer service life due to high thermal stability

-  good seal compatibility, please ask for precise information in regard to your material

-  exce

Fully synthetic heat transfer fluid containing synthetic additives blended in a stable synthetic oil base conforming to USDA regulations. 

-  compatible with mineral oil

-  high pressure ability

-  longer service life due to high thermal stability

-  good seal compatibility, please ask for precise information in regard to your material

-  excellent viscosity temperature behaviour

-  Food grade, i.e. the product fulfills the requirements for an H1 lubricant for use in the food industry

Certificate: NSF, HALAL

ISO VG: 22 and 32

A high viscosity synthetic industrial gear, bearing and chain fluid with good high temperature stability and wear protection. 

-  compatible with mineral oil

-  high pressure ability

-  extended drain intervals reduces oil disposal, thus increasing cost effectiveness

-  low residue forming

-  Food grade, i.e. the product fulfills the requireme

A high viscosity synthetic industrial gear, bearing and chain fluid with good high temperature stability and wear protection. 

-  compatible with mineral oil

-  high pressure ability

-  extended drain intervals reduces oil disposal, thus increasing cost effectiveness

-  low residue forming

-  Food grade, i.e. the product fulfills the requirements for an H1 lubricant for use in the food industry

Certificate: NSF, HALAL

ISO VG: 22, 46, 220, 320 and 460

A very soft, temperature resistant roller bearing grease offering good wear and water resistance and corrosion protection in combination with food compatibility.

-  Relative good compatible with elastomers and seals

-  very good tackiness

-  excellent wear protection

-  odor less

-  good resistant against cold and hot water, even sea water

-  F

A very soft, temperature resistant roller bearing grease offering good wear and water resistance and corrosion protection in combination with food compatibility.

-  Relative good compatible with elastomers and seals

-  very good tackiness

-  excellent wear protection

-  odor less

-  good resistant against cold and hot water, even sea water

-  Food grade, i.e. the product fulfills the requirements for an H1 lubricant for use in the food industry

Certificate: NSF, HALAL

NLGI: 0

One of the most modern synthetic oil based food grade greases. It offers extremely good water resistance and strong adherence. May be used for bearings and other lubrication points in food industry, all components conform to the regulations of USDA H1.

-  Very good corrosion protection

-  suitable for centralized lubrication systems

-  excel

One of the most modern synthetic oil based food grade greases. It offers extremely good water resistance and strong adherence. May be used for bearings and other lubrication points in food industry, all components conform to the regulations of USDA H1.

-  Very good corrosion protection

-  suitable for centralized lubrication systems

-  excellent wear protection

-  odor less

-  good resistant against cold and hot water, even sea water

-  Food grade, i.e. the product fulfills the requirements for an H1 lubricant for use in the food industry

Certificate: NSF, HALAL

NLGI: 00

A temperature resistant roller bearing grease offering good wear and water resistance, and corrosion protection in combination with food compatibility. It contains a high temperature resistant aluminum complex thickener in combination with a modern, synthetic polyalfaolefine base fluid.

A temperature resistant roller bearing grease offering good wear and water resistance, and corrosion protection in combination with food compatibility. It contains a high temperature resistant aluminum complex thickener in combination with a modern, synthetic polyalfaolefine base fluid.

-  Relative good compatible with elastomers and seals

-  Very good tackiness

-  excellent wear protection

-  odor less

-  withstands many alcohols and acids

-  Food grade, i.e. the product fulfills the requirements for an H1 lubricant for use in the food industry

Certificate: NSF, HALAL

NLGI: 2

High temperature grease for food industry. A light color, synthetic PAO based, waterproofed, non-dropping, multipurpose grease for bearings and gears. It offers extreme good water resistance.

-  PTFE solid lubricant share offering additional friction reducing

-  very good corrosion protection

-  good resistant against cold and hot water, eve

High temperature grease for food industry. A light color, synthetic PAO based, waterproofed, non-dropping, multipurpose grease for bearings and gears. It offers extreme good water resistance.

-  PTFE solid lubricant share offering additional friction reducing

-  very good corrosion protection

-  good resistant against cold and hot water, even sea water

-  excellent wear protection

-  good resistant against washing off

-  withstands many alcohols and acids

-  Food grade, i.e. the product fulfills the requirements for an H1 lubricant for use in the food industry

Certificate: NSF, HALAL

NLGI: 2

Virtually odorless, colorless, and tasteless lubrication grease. It is made with a white mineral oil and an aluminum complex soap thickener. It also contains rust inhibitor protecting bearings and metal surfaces subjected to wet conditions, humidity, water washing and steam. It also protects during periods of machine idleness. It resist w

Virtually odorless, colorless, and tasteless lubrication grease. It is made with a white mineral oil and an aluminum complex soap thickener. It also contains rust inhibitor protecting bearings and metal surfaces subjected to wet conditions, humidity, water washing and steam. It also protects during periods of machine idleness. It resist water washout and provides a sealing of the bearing against entrance of water, or fruit and vegetable juices.

-  Very good corrosion protection and wear protection

-  good resistant against cold and hot water, even sea water

-  good resistant against washing of

-  Food grade, i.e. the product fulfills the requirements for an H1 lubricant for use in the food industry

Certificate: NSF, HALAL

NLGI: 2

A well balanced combination of over based calcium sulphonate dispersed in a mixture of high viscosity synthetic base fluid PAO. It is best suited for low to medium to high speed bearings, sealed for life bearings and in most extended life operations.

-  Very good corrosion properties

-  Outstanding thermal stability

-  Good sealing propertie

A well balanced combination of over based calcium sulphonate dispersed in a mixture of high viscosity synthetic base fluid PAO. It is best suited for low to medium to high speed bearings, sealed for life bearings and in most extended life operations.

-  Very good corrosion properties

-  Outstanding thermal stability

-  Good sealing properties

-  Long wear, long tool life

-  Food grade, i.e. the product fulfills the requirements for an H1 lubricant for use in the food industry

Certificate: NSF, HALAL

NLGI: 2

Made with a white mineral oil and an aluminum complex soap thickener. Extreme care is taken throughout the manufacture to protect its purity.

-  Very good corrosion protection and wear protection

-  suitable for centralized lubrication systems

-  excellent tackiness

-  good resistant against cold and hot water, even sea water

-  very good wate

Made with a white mineral oil and an aluminum complex soap thickener. Extreme care is taken throughout the manufacture to protect its purity.

-  Very good corrosion protection and wear protection

-  suitable for centralized lubrication systems

-  excellent tackiness

-  good resistant against cold and hot water, even sea water

-  very good water resistance 

-  withstands many alcohols and acids

-  Food grade, i.e. the product fulfills the requirements for an H1 lubricant for use in the food industry

Certificate: NSF, HALAL

NLGI: 2

A non-toxic oil lubricant are highly refined: colorless, odorless, and tasteless. Suit the need of all types of industrial lubrication, requiring oils of viscosities on the range. Superior lubricant for ways, automatic lubrication systems of all types, manual lubrication (oilcan, drip feed etc.) with exceptional anti-wear, rust and corros

A non-toxic oil lubricant are highly refined: colorless, odorless, and tasteless. Suit the need of all types of industrial lubrication, requiring oils of viscosities on the range. Superior lubricant for ways, automatic lubrication systems of all types, manual lubrication (oilcan, drip feed etc.) with exceptional anti-wear, rust and corrosion, oxidation protection.

-  wide range of viscosity

-  assuring low coefficient of friction

-  low evaporation rates carbon-free

-  residue free results

-  Food grade, i.e. the product fulfills the requirements for an H1 lubricant for use in the food industry

Certificate: NSF, HALAL

ISO VG: 5, 10, 15, 22, 32, 46, 68, 100, 150, 220, 320, 460 and 680

A NON-TOXIC FOOD GRADE AW HYDRAULIC, COMPRESSOR, GEAR, CIRCULATORY AND AIRLINE FLUIDS Lubricating oil to suit the needs of all types of industrial lubrication. Superior lubricant for ways, automatic lube systems of all types, manual lubrication, with exceptional anti-wear, rust and corrosion, oxidation protection.

-  High viscosity index a

A NON-TOXIC FOOD GRADE AW HYDRAULIC, COMPRESSOR, GEAR, CIRCULATORY AND AIRLINE FLUIDS Lubricating oil to suit the needs of all types of industrial lubrication. Superior lubricant for ways, automatic lube systems of all types, manual lubrication, with exceptional anti-wear, rust and corrosion, oxidation protection.

-  High viscosity index and non-drip features

-  assuring low coefficient of friction

-  low evaporation rates carbon-free

-  residue free results

-  Food grade, i.e. the product fulfills the requirements for an H1 lubricant for use in the food industry

Certificate: NSF, HALAL

ISO VG: 32, 46, 68, 100, 150, 220, 320 and 460 

A NON-TOXIC SYNTHETIC FOOD GRADE AW HYDRAULIC, COMPRESSOR, GEAR, CIRCULATORY AND AIRLINE FLUIDS lubricating oil to suit the needs of all types of industrial lubrication. Superior lubricant for ways, automatic lube systems of all types, manual lubrication, with exceptional anti-wear, rust and corrosion, oxidation protection.

-  High viscosi

A NON-TOXIC SYNTHETIC FOOD GRADE AW HYDRAULIC, COMPRESSOR, GEAR, CIRCULATORY AND AIRLINE FLUIDS lubricating oil to suit the needs of all types of industrial lubrication. Superior lubricant for ways, automatic lube systems of all types, manual lubrication, with exceptional anti-wear, rust and corrosion, oxidation protection.

-  High viscosity index and non-drip features

-  Rust and corrosion protection

-  low evaporation rates carbon-free

-  residue free results

-  Food grade, i.e. the product fulfills the requirements for an H1 lubricant for use in the food industry

Certificate: NSF, HALAL

ISO VG: 15, 22, 32, 46, 68, 100, 150, 220, 320 and 460 

SPECIAL FOOD GRADE GREASE, controlled-purity lubricant developed for universal use in food contact type industries. Special rust and oxidation inhibitors prevent machinery deterioration and ensure long- term production. 

-  stands severe water-washout

-  rust and oxidation inhibitors 

-  excellent wear protection

-  odor less

-  Food grade, i.

SPECIAL FOOD GRADE GREASE, controlled-purity lubricant developed for universal use in food contact type industries. Special rust and oxidation inhibitors prevent machinery deterioration and ensure long- term production. 

-  stands severe water-washout

-  rust and oxidation inhibitors 

-  excellent wear protection

-  odor less

-  Food grade, i.e. the product fulfills the requirements for an H1 lubricant for use in the food industry

Certificate: NSF, HALAL

NLGI: 2

Grease for high loads and long-term lubrication under difficult environmental conditions. Formulated with medicinal white oil base and synthetic hydrocarbons, reinforced with additives and solid lubricants to improve its performance.

-  Excellent adherence and sealing capacity, even in presence of cold or hot water, salt water and steam

-  

Grease for high loads and long-term lubrication under difficult environmental conditions. Formulated with medicinal white oil base and synthetic hydrocarbons, reinforced with additives and solid lubricants to improve its performance.

-  Excellent adherence and sealing capacity, even in presence of cold or hot water, salt water and steam

-  Protects against corrosion

Certificate: NSF, HALAL, Kosher

NLGI: 2

Anti-wear Hydraulic Oils containing high quality additive. Anti-wear, anti-foam and anti-oxidation agent available in ISO VG 15 to 220 viscosity grades. 

-  Protects against wear of heavily loaded

-  Excellent protection against rust and a good thin oil film inhibition to protect surfaces wish are only intermittently wetted by oil.

ISO VG: 1

Anti-wear Hydraulic Oils containing high quality additive. Anti-wear, anti-foam and anti-oxidation agent available in ISO VG 15 to 220 viscosity grades. 

-  Protects against wear of heavily loaded

-  Excellent protection against rust and a good thin oil film inhibition to protect surfaces wish are only intermittently wetted by oil.

ISO VG: 15, 22, 32, 46, 68, 100, 150 and 220

Available size: 200 lts, 20 lts

The multi-purpose, extreme pressure gear oil exceptional shear stability assures maximum lubrication protection. It is recommended for all types of enclosed gear mechanisms, including spur, herringbone, spiral-bevel, bevel, hypoid and worm.  It will lubricate all types of equipment from the lightest to the heaviest, including all industri

The multi-purpose, extreme pressure gear oil exceptional shear stability assures maximum lubrication protection. It is recommended for all types of enclosed gear mechanisms, including spur, herringbone, spiral-bevel, bevel, hypoid and worm.  It will lubricate all types of equipment from the lightest to the heaviest, including all industrial and automotive applications 

-  Absorbs extremely shock loads (EP additives)

-  Excellent rust prevention properties protect gears from damage due to rust

-  Provides superior high temperature stability

-  Reduces gear wear up to 50 %

ISO VG: 68, 100, 150, 220, 320, 460 and 680   SAE: 90 and 140

Available size: 200 lts, 20 lts

Is formulated with tacky, dense, closely packed fluid molecules plus additives, our proprietary, super-tough, Extreme Pressure Fluid lubricating film that greatly resists being squeezed from pressure areas virtually eliminating metal-to-metal contact under the most severe loads.

-  Unique premium additive chemistry displaces water on metal

Is formulated with tacky, dense, closely packed fluid molecules plus additives, our proprietary, super-tough, Extreme Pressure Fluid lubricating film that greatly resists being squeezed from pressure areas virtually eliminating metal-to-metal contact under the most severe loads.

-  Unique premium additive chemistry displaces water on metal surfaces while providing excellent corrosion protection

-  Excellent demulsibility properties 

-  Tacky, adhesive nature make it highly resistant to being washed off or diluted by water or coolants.

ISO VG: 68, 150 and 220  

Available size: 200 lts, 20 lts

A LUBRICANT DESIGNED EXCLUSIVELY FOR THE LUBRICATION OF AIR LINES. Superior cleanliness for effective clean air lines free of rust corrosion.  A clean, ashless, residue free fluid that cleans as it lubricates to maintain air-flow free from blockage while as suring maximum “Wetting” action of all metallic surfaces for reduced wear and tear

A LUBRICANT DESIGNED EXCLUSIVELY FOR THE LUBRICATION OF AIR LINES. Superior cleanliness for effective clean air lines free of rust corrosion.  A clean, ashless, residue free fluid that cleans as it lubricates to maintain air-flow free from blockage while as suring maximum “Wetting” action of all metallic surfaces for reduced wear and tear, oxidation and deterioration of expensive equipment.

ISO VG: 32 (SAE 10)

Available size: 200 lts, 20 lts

Use in a wide variety of industrial processes. It is manufactured from synthetic base oil and a selected additive system which provides excellent thermal and oxidation stability at sustained high temperature and good heat transfer properties. Is non-corrosive to copper and steel. Excellent thermal and oxidation stability ordinary heat tra

Use in a wide variety of industrial processes. It is manufactured from synthetic base oil and a selected additive system which provides excellent thermal and oxidation stability at sustained high temperature and good heat transfer properties. Is non-corrosive to copper and steel. Excellent thermal and oxidation stability ordinary heat transfer oils lack the stability at temperature extreme to prevent slugging and deposition of oil solids on internal oil-side parts

ISO VG: 32, 46, 68, and 100 

Available size: 200 lts, 20 lts

A fast drying extreme pressure spray based on MoS2. It will be used for service-free dry lubrication under heavy load, but low speed. It sticks well to surfaces and will then be used as dry lubricant when liquid lubricants are not sufficient enough because of great heat or cold or other unfavorable operating conditions. Useful for extreme

A fast drying extreme pressure spray based on MoS2. It will be used for service-free dry lubrication under heavy load, but low speed. It sticks well to surfaces and will then be used as dry lubricant when liquid lubricants are not sufficient enough because of great heat or cold or other unfavorable operating conditions. Useful for extreme loads, high pressure and temperatures. Reduces friction and wear.

• Operating Pressure: Up to 10 bar (145 psi)
• Dispensing Volume: 0.5 ml per stroke/impulse
• Lubricant Compatibility: Grease up to NLGI 2 or oil
• Lubricator Compatibility: Fits 60, 125, and 250 ml simalube dispensers
• Power Supply: Replaceable battery pack, 6 V 2.3 Ah (or 6 V 2.9 Ah for low temperatures)
• 
  

• Operating Pressure: Up to 10 bar (145 psi)
• Dispensing Volume: 0.5 ml per stroke/impulse
• Lubricant Compatibility: Grease up to NLGI 2 or oil
• Lubricator Compatibility: Fits 60, 125, and 250 ml simalube dispensers
• Power Supply: Replaceable battery pack, 6 V 2.3 Ah (or 6 V 2.9 Ah for low temperatures)
• Protection Rating: IP68 (dust- and waterproof)
• Operating Temperature: –10 °C to +55 °C
• Connection Thread: G ¼" (with integrated non-return valve)
• Dimensions: Ø 60 × 93 mm
• Weight: 0.24 kg – 0.26 kg
• Warranty & Service Life: 3 years from production date or until 10 simalube lubricators (125 ml) are emptied 

Simalube accessories attach to automatic lubricators, and allow them to work with nearly any application. In most cases, you can screw the lubricator directly onto the lubrication point. But if that point is in a tight space, has a different size fitting, needs a brush, or requires mounting of the lubricator, then our accessories will com

Simalube accessories attach to automatic lubricators, and allow them to work with nearly any application. In most cases, you can screw the lubricator directly onto the lubrication point. But if that point is in a tight space, has a different size fitting, needs a brush, or requires mounting of the lubricator, then our accessories will come in handy.

• Brushes
• Connectors
• Clamps
• Nipple Adapter
• Hoses
• Protect
• Protective Covers

With the «simatec world of maintenance» app, simatec ag has created a platform for easier and more efficient management of lubrication work. The app offers the user the possibility to record lubrication points, to set the necessary parameters for the lubrication and to control or monitor all activities around the lubrication. The simalube

With the «simatec world of maintenance» app, simatec ag has created a platform for easier and more efficient management of lubrication work. The app offers the user the possibility to record lubrication points, to set the necessary parameters for the lubrication and to control or monitor all activities around the lubrication. The simalube IMPULSE connect equipped with Bluetooth® can be configured directly via the app, the current operating status can be viewed from a distance of up to 20m via the app.

• Monitoring of lubrication points
• Creation of electronic lubrication schedules in Lubechart 
• Digital ordering process
• Calculation Pro: Calculation programme for the correct setting of your lubricators. 

A professional, industrial-grade maintenance kit designed for the fast, precise mounting and dismounting of bearings with bore diameters between 

10--30mm.

• Components: Includes 21 impact rings, 2 impact sleeves, 1 non-rebound hammer, 1 sliding hammer, 2 spindles, 5 sets of puller arms, and 7 support rings.
• Application: Ideal for mounting bea

A professional, industrial-grade maintenance kit designed for the fast, precise mounting and dismounting of bearings with bore diameters between 

10--30mm.

• Components: Includes 21 impact rings, 2 impact sleeves, 1 non-rebound hammer, 1 sliding hammer, 2 spindles, 5 sets of puller arms, and 7 support rings.
• Application: Ideal for mounting bearings, bushings, seals, and tension rollers.
• Benefits: Prevents bearing damage by ensuring mounting forces are not transmitted through the rolling elements.
• Usage: Used in industrial settings for maintenance and repair, often referred to as a "combi-kit". 

. 

A specialized, Swiss-made bearing puller kit designed for easy removal of deep groove ball bearings (inner diameters 10–100mm) from shafts and housings.

• Capacity: Suitable for over 60 different deep groove ball bearing types, including series 6000-6020, 6200-6217, 6300-6313, and 6403-6410.
• Versatility: Works on both shafts and housings, inc

A specialized, Swiss-made bearing puller kit designed for easy removal of deep groove ball bearings (inner diameters 10–100mm) from shafts and housings.

• Capacity: Suitable for over 60 different deep groove ball bearing types, including series 6000-6020, 6200-6217, 6300-6313, and 6403-6410.
• Versatility: Works on both shafts and housings, including shielded (ZZ) bearings if the seal is removed.
• Design: Features specialized hooks that lock between the inner and outer rings for secure gripping.
• Components: Comes in a compact case (approx. 3.2 kg). 

A professional, high-quality toolset designed for removing over 50 different deep groove ball bearings with inner diameters from 30 to 160 mm.

• Broad Application: Suitable for a wide variety of industries, capable of removing over 50 types of deep groove ball bearings.
• Non-Destructive Removal: Enables removal without requiring the disassembl

A professional, high-quality toolset designed for removing over 50 different deep groove ball bearings with inner diameters from 30 to 160 mm.

• Broad Application: Suitable for a wide variety of industries, capable of removing over 50 types of deep groove ball bearings.
• Non-Destructive Removal: Enables removal without requiring the disassembly of surrounding machine components.
• Simple Operation: Bearings are removed by drilling into the bearing race, inserting ball adapters, rotating them 90 degrees, and using the spindle to pull.
• Versatile Kit: The kit includes various ball adapters and extensions.
• Robust Design: High-quality case, making it an ideal, larger complement to the BP 61 bearing puller. 

 Specialized bearing fitting tool designed for mounting roller bearings and seals with bore diameters of 55–60 mm.

• Bearing Bore Diameter Range: 55 - 60 mm.
• Maximum Press-in Force: Up to 5 tons (50 kN).
• Kit Contents: 6 aluminum assembly rings, 1 specialized FT-P sleeve, and 1 FT-P DC adapter ring.
• Compatibility: Designed for use with presses; 

 Specialized bearing fitting tool designed for mounting roller bearings and seals with bore diameters of 55–60 mm.

• Bearing Bore Diameter Range: 55 - 60 mm.
• Maximum Press-in Force: Up to 5 tons (50 kN).
• Kit Contents: 6 aluminum assembly rings, 1 specialized FT-P sleeve, and 1 FT-P DC adapter ring.
• Compatibility: Designed for use with presses; also compatible with FT 33 ringsusing the adapter.
• Weight & Dimensions: 3.5 kg, packed in a 340 x 275 x 83 mm case.
• Applications: Ideal for general mechanical engineering, automotive, and maintenance, especially where high mounting forces are required. 

Bearing and seal dismounting toolset designed for professional, damage-free extraction.

• Application: Dismounts deep groove ball bearings (tight fit on inner or outer ring) and radial shaft seals.
• Capacity: Shaft diameters 10–100mm10–100mm (0.4–3.9in0.4–3.9in); External diameters up to 150mm150mm (5.9in5.9in).
• Kit Contents: 1x Sliding hammer 

Bearing and seal dismounting toolset designed for professional, damage-free extraction.

• Application: Dismounts deep groove ball bearings (tight fit on inner or outer ring) and radial shaft seals.
• Capacity: Shaft diameters 10–100mm10–100mm (0.4–3.9in0.4–3.9in); External diameters up to 150mm150mm (5.9in5.9in).
• Kit Contents: 1x Sliding hammer (with extension), 6x pairs of hinged extraction arms (A1-A6), 2x threaded spindles (SW 19), 9x support washers (∅10–75mm∅10–75mm), 50x self-tapping screws, and 10x spacer rings.
• Weight/Dimensions: 6.6kg6.6kg / 440×350×95mm440×350×95mm case.
• Compatibility: Ideal complement to the simatool Fitting Tool FT 33. 

Designed by simatec for bearing installation. 

• Impact Rings: 33 plastic nylon impact rings.
• Impact Sleeves: 3 aluminum impact sleeves.
• Hammer: 1 non-rebound (recoilless) hammer.
• Case: Compact, portable plastic case. 
• Application: Fast, precise, and secure mounting of rolling bearings and radial shaft seals.
• Bearing Bore Diameter Range: 10 to 50

Designed by simatec for bearing installation. 

• Impact Rings: 33 plastic nylon impact rings.
• Impact Sleeves: 3 aluminum impact sleeves.
• Hammer: 1 non-rebound (recoilless) hammer.
• Case: Compact, portable plastic case. 
• Application: Fast, precise, and secure mounting of rolling bearings and radial shaft seals.
• Bearing Bore Diameter Range: 10 to 50 mm.
• Mounting Capabilities: Can mount bearings on shafts, in housings, or both simultaneously.
• Damage Prevention: Ensures mounting forces are never transmitted through the rolling elements of the bearing.
• Compatibility: Suitable for over 200 different deep groove ball bearings.
• Material: Impact rings are made of durable, impact-resistant material. 

A professional slide hammer seal puller designed to quickly and safely remove radial shaft seals (10–30 seconds) without damaging shafts or housing.

• Tool Type: Slide Hammer Radial Shaft Seal Puller
• Kit Contents: 1x Steel Sliding Hammer, 2x Extensions, 50x Special Screws, 20x Spacer Sleeves
• Application: Removal of radial shaft seals in indust

A professional slide hammer seal puller designed to quickly and safely remove radial shaft seals (10–30 seconds) without damaging shafts or housing.

• Tool Type: Slide Hammer Radial Shaft Seal Puller
• Kit Contents: 1x Steel Sliding Hammer, 2x Extensions, 50x Special Screws, 20x Spacer Sleeves
• Application: Removal of radial shaft seals in industrial, agricultural, automotive, and motor applications
• Functionality: Removes seals without requiring disassembly of adjacent parts
• Capacity: Suitable for various sizes of radial shaft seals 

Key Features:

• Damage Prevention: Eliminates damage to shafts and bearing housings
• Efficiency: Removes seals in 10 to 30 seconds
• Versatility: Works on recessed seals using the provided extensions

A TÜV SÜD-certified device designed for safe, vertical, or horizontal lifting and installation of large bearings (up to 500 kg), reducing injury and damage risks.

• BHT 200–400: For outer diameters of 200–400 mm; Max lift: 150 kg.
• BHT 300–500: For outer diameters of 300–500 mm; Max lift: 500 kg.
• BHT 500–700: For outer diameters of 500–700 mm; 

A TÜV SÜD-certified device designed for safe, vertical, or horizontal lifting and installation of large bearings (up to 500 kg), reducing injury and damage risks.

• BHT 200–400: For outer diameters of 200–400 mm; Max lift: 150 kg.
• BHT 300–500: For outer diameters of 300–500 mm; Max lift: 500 kg.
• BHT 500–700: For outer diameters of 500–700 mm; Max lift: 500 kg.
• Weight (BHT 300-500): 6.3 kg.
• Standards: DIN EN 13155, AfPS GS 2019:01 PAK.